Appendix A Tcp/Ip Configuration For Windows 95/98; Install Tcp/Ip Protocol Into Your Pc - D-Link DI-713 User Manual

Appendix A TCP/IP Configuration for Windows 95/98

This section is an introduction on you how to install the TCP/IP protocol into your
personal computer if the TCP/IP protocol hasn't been installed yet. Under the normal
installation procedure for network adapters, the TCP/IP protocol will be installed
automatically. We are assuming that you have successfully installed one network card or
wireless adapter on your personal computer. If not, please refer to your network card
manual. Moreover, the Section A.2 tells you how to set TCP/IP values for working with
the DI-713 correctly.
A.1 Install TCP/IP Protocol into Your PC
Click the Start button and choose Settings, then click Control Panel.
1.
Double click the Network icon and select the Configuration tab in the Network
2.
window.
Click the Add button to add a network component to your PC.
3.
Double click the Protocol to add TCP/IP protocol.
4.
REV: 11062000
20