D-Link DI-713 User Manual page 20

4.4.1 Static IP Address
Enter the proper WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS
settings provided by your ISP. Contact your ISP if you do not have this information.
4.4.2 Dynamic IP Address
Host Name: optional. Required by some ISPs, for example, @Home.
1.
Renew IP Forever: this feature enables the DI-713 to renew its IP address
2.
automatically when the lease time is being expired even if the system is idle.
4.4.3 PPP over Ethernet
PPPoE Account and Password : the account and password your ISP assigned to you.
1.
If you don't want to change the password, keep it empty.
PPPoE Service Name: optional. Input the service name if your ISP requires it.
2.
Maximum Idle Time: the maximum time the connection is idle before you are
3.
disconnected from your ISP and your PPPOE session is terminated.
4.4.4 Dial-up Network
Dial-up Telephone, Account and Password: assigned by your ISP. If you don't want
1.
to change the password, keep it empty.
Primary and Secondary DNS: automatically assigned if they are configured as
2.
"0.0.0.0."
Maximum Idle Time: the time of no activity to disconnect your dial-up session.
3.
Baud Rate: the communication speed between the DI-713 and your MODEM or
4.
ISDN TA.
Extra Setting: needed to optimize the communication quality between the ISP and
5.
your MODEM or ISDN TA
REV: 11062000
13