Hardware Installation - D-Link DSL-2750 User Manual

Section 2 - Installation
1. Turn off and unplug your DSL broadband modem. This is required.
2. Position your router close to your modem and a computer. Place the router in an open area of your intended
work area for better wireless coverage.
3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer.
Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer.
D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

Hardware Installation

Modem
PC
10/100 BASE-TX Cable
9