Procedure For Hardware Installation - D-Link DI-713 User Manual

2.1.2. Rear Panel
Ports:
Port
ON/OFF Power switch
DC IN
Power inlet (DC 5V)
COM Serial port (connect analog modem or console cable)

2.2 Procedure for Hardware Installation

1. Decide where to place your Wireless Broadband Router:
You can place your Wireless Broadband Router on a desk or other secure surface, or
you can mount it on a wall. For optimal performance, place your Wireless Broadband
Router in the center of your office (or your home) in a location that is away from any
potential source of interference, such as a metal wall or microwave oven. This
location must be close to power and a network connection.
REV: 101404
Figure 2-2 Rear Panel
Description
5