Wolf OG30 Installation Manual page 20

Outdoor Grill Installation
Install Side Burner to Cart
GAS LINE CONNECTION (LP GAS)
1) Connect 2-stage LP gas regulator to flare tee at
location shown. Connect flare swivel connector to one
end of flare tee. Refer to illus 18.
2) Connect this assembly to flexible gas line coming into
grill cart from side burner as shown illus 19.
3) Connect this assembly to grill manifold at flare swivel
connector as shown illus 19.
4) Reinstall rear panel and door of grill cart. Reposition
grill drip tray. Place burner cap on burner head, place
grate on burner pan and affix knob to bezel with bezel
nylon liner.
FLARE TEE
FLARE
SWIVEL
LP GAS
REGULATOR
Illus 18.
FLEXIBLE
GAS LINE
GRILL
MANIFOLD
Illus 19.
GAS LINE CONNECTION (NATURAL GAS)
1) Split high pressure natural gas line into two lines, one
to attach to outdoor grill natural gas regulator and one
to attach to side burner via flexible line and
adapter. Make sure that flexible gas line is placed
through cart access hole. Attach flexible line to side
burner regulator at pipe elbow. Elbow may be rotated
to face downward for larger adapters. Do not rotate
elbow upward. Refer to illus 20.
Illus 20.
20
1
/ " NPT
2