Wolf OG30 Installation Manual page 15

Outdoor Grill Installation
Install Side Burner to Cart
Wolf model SB13 side burner can be installed on the right
side of any Wolf portable grill cart. For ease of installation,
it is recommended that installation be performed by two
technicians. Gloves should be worn to protect hands.
TOOLS AND MATERIALS REQUIRED
• Phillips screwdriver.
• Set of standard hex wrenches and open end wrenches.
• Alignment tool (provided).
• 12" minimum bar clamp.
(305)
• Crescent wrench for LP gas installation.
REMOVE SIDE SHELF (IF INSTALLED) AND CART PLUG
1) Lift side shelf so lower front screw is exposed and
remove screw. Refer to illus 1.
2) Lower shelf to down position and remove upper front
screw. Refer to illus 2.
3) Remove side shelf and front bracket. Refer to illus 2.
LOWER SCREW
Illus 1.
UPPER
SCREW
FRONT
SIDE SHELF
BRACKET
Illus 2.
4) Remove rear screws and bracket. Refer to illus 3.
5) Remove cart plug from access hole by pushing out
from inside of cart. Refer to illus 3.
6) Side burner is placed inside shroud for shipping. Lift
out to remove side burner from shroud. Refer to illus 4.
REAR
BRACKET
CART PLUG
Illus 3.
wolfappliance.com
Illus 4.
15