Oki B721 User Manual page 17

Tray Available size range
MP Tray Width:
76.2 to 216 mm (3.0 to 8.5 inches)
Length:
127 to 1321 mm (5 to 52.0 inches)
Note
● You can configure the [Custom] setting only when
[Paper Size] is set to [Custom].
● The available size range for duplex printing is the same as
that for tray 2.
1
Press the <ENTER> button on the
operator panel.
2
Press the scroll button
to select [Menus] and press the
<ENTER> button.
3
Check that [Tray Configuration]
is selected and press the <ENTER>
button.
4
Press the scroll button
to select [(Tray name) Config] of the
paper tray in which you loaded paper
and then press the <ENTER> button.
5
Check that [Paper Size] is selected and
press the <ENTER> button.
6
Press the scroll button
to select [Custom] and then press the
<ENTER> button.
7
Press the <BACK> button.
8
Press the scroll button
[X Dimension] and then press the
<ENTER> button.
9
Enter the paper width value using
the ten-key pad and then press the
<ENTER> button.
10
Press the <BACK> button.
11
Press the scroll button
[Y Dimension] and then press the
<ENTER> button.
12
Enter the paper length value using
the ten-key pad and then press the
<ENTER> button.
13
Press the <ON LINE> button to exit the
menu mode.
several times
several times
several times
to select
to select
- 17 -
For Windows PCL Printer Driver
1
Click [Start] and select [Devices and
Printers].
2
Right-click the
Your Printer
select the type of driver you want to
specify from [Printing preferences].
3
On the [Setup] tab, click [Paper Feed
Options...].
Printing with Various Functions
icon and
1