Oki B721 User Manual page 114

Network Setting Items
„ MAC Address Filtering
Web browser
MAC Address Filtering
4
MAC Address Access
MAC Address #1-50
Administrator's MAC Address to
Register
„ SSL/TLS
Web browser
SSL/TLS
Cipher Strength
Certificate Generation
Item
Configuration
Tool
(Network
Setting Plug-in)
-
-
-
-
Item
Configuration Network
Tool Card
(Network Setup
Setting Plug-in) (Mac)
- -
- -
- -
Shaded text indicates the factory default setting.
Network
Setting
Card
Setup
(Mac)
- ENABLE
DISABLE
- ACCEPT
DENY
- 00:00:00:
00:00:00
- 00:00:00:
00:00:00
Shaded text indicates the factory default setting.
Setting
ENABLE
DISABLE
Weak
Standard
Strong
Use a Self-signed certificate (Self-signed
certificate)
Use a certificate signed by a certificate authority (Certificate-
authority-signed certificate)
- 114 -
Description
Set whether to use MAC address
filtering, the function to allow
access only from MAC addresses
specified. This function requires
thorough knowledge of MAC
addresses. Normally, select
[DISABLE]. Set the items
below properly when selecting
[ENABLE]; otherwise, no access
is allowed from the network.
Set whether to allow or deny
access from the MAC addresses
specified in MAC Address #1-50.
Specify the MAC addresses that
are allowed to access the printer.
Entering "00:00:00:00:00:00"
disables the setting.
Set the MAC address of the
administrator. Only this address
can always access the printer.
Remember that when the
administrator accesses the
printer via a proxy server, this
item is set to the address of
the proxy server and all access
via the proxy server is allowed.
It is recommended that the
administrator accesses the
printer without using a proxy
server.
Description
Set whether to use SSL/
TLS.
Set the cypher strength.
Generate a self-signed
certificate. Or, generate
a CSR to send to a
certificate authority and
install a certificate issued
by a certificate authority.