Auto Tray Switching - Oki B721 User Manual

Printing with Various Functions
For Windows PS Printer Driver
1
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences].
4
Select the [Paper/Quality] tab.
5
Select [Automatically Select] from
[Paper Source].
6
Configure other settings if necessary and
then start printing.
For Mac OS X PS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Select [Paper Feed] from the panel
menu.
4
Select [All Pages From] and select
[Auto Select].
5
Configure other settings if necessary and
then start printing.
Memo
● If the print dialog does not contain the options you expect
to see, click the [Show Details] button at the bottom of
the dialog.

Auto Tray Switching

You can switch paper feed trays automatically.
When a tray runs out of paper while printing, the
printer locates another tray with the same size
of paper on the printer driver and begins feeding
paper from that tray.
This function is effective for large print jobs of
the same paper size.
First, set on the operator panel for the MP Tray
to be available for auto selection. Then, set the
auto switching of the tray with the printer driver.
Note
● Make sure to set the same values (paper size, media type,
media weight) for each tray used for auto tray switching.
Available paper size differs depending on each tray. For
details, refer to the User's Manual (Setup).
Memo
● In the default settings, the [Tray Usage] is [Do Not
Use]. When at default settings, the MP Tray is not
supported by the auto tray switching function.
● When a printer is in the power saving mode, press the
<POWER SAVE> button to restore from the mode.
1
Press the <Fn> key.
2
Enter <9> and <5> using the ten-key
pad and press the <ENTER> button.
3
Press the scroll button
[When Mismatching] and then press
the <ENTER> button.
4
Press the <ON LINE> button to exit the
menu mode.
5
Configure the paper source setting on
the print dialog.
For Windows PCL/XPS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences].
4
On the [Setup] tab, click [Paper Feed
Options...].
5
Select the [Auto Tray Change] check
box in [Paper Feed Options...] and
then click [OK].
6
Configure other settings if necessary and
then start printing.
- 32 -
to select