Sound Adjustment - Clarion ProAudio DXZ855MP Owner's Manual

Sound Adjustment
Adjustment items
You can adjust a sound effect or tone quality to
your preference.
Anti Distortion Filter (ADF) Page 24
MAGNA BASS EXTEND Page 24
Sub-woofer speaker volume
(SW VOLUME) Page 25
Bass setting (BASS) Page 25
Treble setting (TREBLE) Page 25
Balance (BALANCE) Page 25
Fader (FADER) Page 25
Filter (FILTER) Page 26
Setting the ADF
• ADF is the abbreviation of Anti Distortion
Filter.
The adopted "Liveliness Enhancement Filter"
and "Sound Tone Compensation" functions
allow well-modulated realistic playback without
affecting the characteristics of the original sound
tone.
This unit is provided with 4 types of sound tone
effects stored in memory. Select the one you
prefer.
ADF-1 : Suitable for genuine speakers
ADF-2 : Suitable for separate speakers
ADF-3 : Suitable for co-axial speakers
USER: This setting can be adjusted by the
user to his or her individual preference.
OFF: No sound effect
• The factory default setting is "OFF".
Notes:
• As the volume changes when ADF is switched,
switch ADF with the volume and "5W VOLUME"
(sub-woofer) turned down as far as possible.
1. Press the [SOUND] button.
2. Touch [ADF].
24
DXZ855MP
3. Touch
l'
~ ~
on the right of the display to
select the ADF mode.
* Select one of "USER", "1", "2", "3", or
"OFF".
4. To change the details of the ADF setting,
press the [ADJ] button.
5. Touch
l' ~~.
on the left of the display to
select the desired item.
Each touch of
l' ~ ~
switches the
adjustment item display as follows:
.Adjustment item (when USER is
selected in step 3)
BASS'" TREBLE ... COMP ... BASS...
.Adjustment item (when 1 to 3 is
selected in step 3)
LEVEL ... COMP ... LEVEL...
6. Touch
l' ~ ~
on the right of the display to
adjust the item.
* "BASS" and "TREBLE" can be adjusted
within the range 1 to 13.
* "LEVEL" can be adjusted within the range -
3 to +3.
* Select either "ON" or "OFF" for "COMP".
7. Press the [SOUND] button to return to the
original mode.
Setting MAGNA BASS
EXTEND
The MAGNA BASS EXTEND does not adjust
the low frequencies like the normal sound
adjustment function, but emphasizes the deep
bass frequencies to provide you with a dynamic
sound.
• The factory default setting is "OFF".
1. Press the [SOUND] button.
2. Touch [M-BASS EX] to select "ON" or
"0FF
II
•
* Each time you touch [M-BASS EX], the
adjustment item changes as following
order:
OFF ... ON ... OFF...
3. Press the [SOUND] button to return to the
original mode.