Operations; Basic Operations - Clarion ProAudio DXZ855MP Owner's Manual

Cd/mp3/wma receiver/cenet & touch panel control
Hide thumbs Also See for ProAudio DXZ855MP:
Table of Contents

Advertisement

Selecting a mode
1. Press the [SRC] button to change the
operation mode.
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
Radio'" (SIRIUS) ... CD/MP3 ...
(CD changer)
(DVD changer) ... (TV)
... AUX ... Radio .
Basic Operations
Be sure to lower the volume before
switching the unit off or the ignition key. The
unit remembers its last volume setting. If you
switch the power OFF with the volume up,
when you switch the power back ON, the
sudden loud volume may hurt your hearing
and damage the unit.
Turning ON/OFF the power
Turning on
Note:
• Be careful when using this unit for
a
long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [ROTARY] knob.
The mode that was previously active is
displayed.
Turning off
1. Press the [ROTARY] knob.
*
The clock will stay displayed after the
power is turned OFF.
II To turn off the clock display
Touch the clock to turn off the clock display
while the power is off.
CODEMATIC function
When "CODEMATIC" is set to "ON", and the
power is turned ON with the DCP attached, the
Touch Code display appears. Touch the display
in the order that was set in the adjust mode.
*
External equipment not connected with
CeNET is not displayed.
Adjusting the volume
1. Turning the [ROTARY] knob clockwise
increases the volume; turning it
counterclockwise decreases the volume.
*
The volume level is from 0 (minimum) to
33 (maximum).
Switching the operation
display mode
There are 2 basic operation displays: standard
operation display and simple operation display.
1. Press and hold the [MODE] button for 2
seconds or longer to switch the operation
display.
In the simple operation display, the operations of
touching
~ ~
-I
in the radio or CD mode display
screen are not required.
For details on the CODEMATIC function, see
"Using the security function" (cf. page 34).
Descriptions given in this manual are mainly for
the standard operation display. For descriptions
for operations in the simple operation display,
refer to the descriptions for the screen displays
in the radio mode or the CD mode.
DXZ855MP
13

Advertisement

Table of Contents
loading

Table of Contents