Table of Contents
Advertisement
TV Mode Operations
A WARNING
Watching TV
Notes:
e After setting a country to be received, tune into a
station. For setting the country, see the subsection
"Setting the receiving country" (page 28).
e With the Display [12] stored in the source unit,
press and hold the BAND button [8} for approx. 1
second to toggle between the seek tuning and the
manual tuning.
(When the seek tuning is selected,
"SRCH' lighis.)
1) Press the FUNC button [7] to select TV mode.
2) Press the BAND button [8] to select a band
and mode.
Each time you press the BAND button [8], the
band and mode
changes
in the following
order:
eae
—TV-2
——
VIR =]
3) Press one of the Preset buttons [9] to tune in
to a station.
Seek tuning
1) While
appears in the display, press
and hold the BAND button [8] for about 1 sec-
ond to switch to the seek tuning.
2) Slide the a-selector [1] to
(right) or <q (left)
to start the seek tuning. When a station is
found, it is automatically tuned in.
> : Seeks higher frequency stations.
<q: Seeks lower frequency stations.
* To stop the seek tuning, slide the a-selector [1]
to <q (left) or P (right).
Manual tuning
1) When
does not appear in the display,
press and hold the BAND button |8} for about
1 second to select manual tuning.
*When
manual tuning is selected,
appears in the display.
26
VRX8370R
2) Slide the a-selector [1] to > (right) or <q (left)
to tune in to a station.
+ Each time you slide the a-selector [1], the fre-
quency changes for the TV band.
Preset memory function
Note:
e When a station is preset, the station previously
stored in the memory at that position is cleared.
Manual memory function
1) Press the BAND button [8] to select a band.
3) Press and hold for about 2 seconds one of
the Preset buttons [9] where you want to
store the station. When a beep sounds, the
station is stored in that button.
* One station in each band can be preset to
each button.
Auto store function
Note:
e This function is not available when the display is
stored.
1) Press the BAND button [8] to select a band.
2) Press the DISP button
to select PS/AS
mode.
* Press the DISP button [10} again to return to
preset mode.
When PS/AS mode is displayed, press and
hold No. 2 of the Preset buttons [9] for about
2 seconds. Stations with good reception are
automatically stored in preset buttons starting
from Preset button [9]. (After storing 6 sta-
tions, preset No. 1 station is tuned in and
auto storing ends.)
*
in the display becomes pink.
* Stations with good reception are stored in the
order from the current station to stations with a
higher frequency. If there are fewer than 6 stations
with good reception, the auto storing returns to
the lowest frequency and resumes from there.
Note:
e When stations are preset by the auto store func-
tion, the station previously stored in the memory
at that position is cleared. If there are fewer than
3
baal
a
ee ae
tet tl a
ein te te oe te ce aeiatde sl Lat patra beens.
+.
Advertisement
Table of Contents
