Placing Calls When You Don't Have Any Calls - Polycom 7000 User Manual

User Guide for the Polycom SoundStation IP 7000 Phone Connected to a Polycom HDX System in Unsupported VoIP Environments

Placing Calls When You Don't Have Any Calls

Note
4
When you place a call, you must specify if the call will be an audio-only call or
a video call.
To place a call when you don't have any calls:
1. Do one of the following:
— Press .
The message "Video or Phone Call?" displays. To place a video call,
press the Video soft key. To place an audio-only call, press the Phone
soft key.
or
— To place a video call, press the Video soft key. To place an audio-only
call, press the Phone soft key.
or
— Enter the phone number of the site you want to call.
The message "Video or Phone Call?" displays. To place a video call,
press the Video soft key. To place an audio-only call, press the
Phone soft key. Then, go to step 3.
2. Do one of the following:
— To enter a phone number, enter the number of the site you want to call.
or
— To enter an IP address or URL (for video calls only):
Placing a call using an IP address or URL may not be enabled for your phone. For
more information, see your system administrator.
Toggle the ABC and 123 soft keys to enter the URL or IP address of the
site you want to call.
You can switch between entering a number or IP address, or a URL,
by pressing the 123 and ABC soft keys.
To enter the letters that display on a number key, press the number
key one or more times.
For example, to enter "a," press
three times quickly.
To enter "." and "@", press
once. To enter "c," press
one or more times quickly.