Connecting The Mediahub Hd - Samsung HG690 Installation Manual

Output to any external source connected to MediaHub HD on the hotel desk.
MediaHub HD Rear
1. Connect the RJP
2. Connect the HDMI IN
MediaHub HD
– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an
external source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/
Inactive sources. The TV switches to the Active external source.
– You have to connect the HDMI of the MediaHub to the
– When the TV is on, connect the TV and the RJP within 10 seconds.
Special features
– PIP
– Auto Detection
16
English
[HG690_EURO]Install_Guide-00ENG.indd 16

Connecting the MediaHub HD

HDMI USB RS/232
1 RS-232 Data Cable
2 HDMI cable
port of the TV and the RS/232 port of the MediaHub HD.
(1(ARC), 2(DVI) or 3) port of the TV and the HDMI port of the MediaHub HD.
TV Rear Panel
COMPONENT COMPONENT
VARIABLE VARIABLE
AUDIO OUT AUDIO OUT
/ AV IN / AV IN
VOL-CTRL VOL-CTRL
(HDD 1.0A) (HDD 1.0A)
/ CLONING / CLONING / CLONING
PC/DVI AUDIO IN PC/DVI AUDIO IN PC/DVI AUDIO IN
HDMI IN 3 HDMI IN 3 HDMI IN 3
HDMI IN 2 HDMI IN 2 HDMI IN 2
(DVI) ( (DVI) (DVI) )
HDMI IN 1 HDMI IN 1 HDMI IN 1
(ARC) (ARC) ( (ARC) )
SATELLITE SATELLITE
AIR/CABLE AIR/CABLE
HDMI IN 2(DVI) port of the TV.
PC IN PC IN
2013-03-21 4:36:54