Table of Contents
Advertisement
Output to any external source connected to MediaHub HD on the hotel desk.
(Inlay sample may vary depending on the model.)
HDMI IN 2
(DVI)
(5V 0.5A)
(5V 0.5A)
/CLONING
/CLONING
HDMI IN 1
(ARC)
AV IN
AV IN
1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the
1
or
2(DVI)
y MediaHub HD
– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an
external source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/
Inactive sources. The TV switches to the Active external source.
– You have to connect the HDMI of the MediaHub to the HDMI IN(set in hotel option-Remote Jack Pack-HDMI
option)port of the TV.
– When the TV is on, connect the TV and the RJP within 10 seconds.
y Special features
– Plug & Play
– Auto Detection
22
English
Connecting the MediaHub HD
TV Rear Panel
DATA
DATA
EX-LINK
EX-LINK
EX-LINK
ANT IN
ANT IN
AUDIO OUT
AUDIO OUT
AIR/CABLE
AIR/CABLE
or
1(ARC)
port of the TV and the HDMI port of the MediaHub HD.
MediaHub HD Rear
HDMI
USB
2 HDMI cable
1 RS-232 Data Cable
RS/232
Advertisement
Table of Contents
