Samsung HG690 Installation Manual page 23

No
Category
17 Network
18 Widget
19 Service
[HG690_EURO]Install_Guide-00ENG.indd 23
Hotel TV Function
Item initial value
Network Setup
Hotel ID Setting
Apps Edit
Widget Mode ON
Vendor
Solution Type
Server
License Server IP
Setting
Server URL
Setting
Virtual Standby OFF
IPTV Mode OFF
External Source
ON
Browser
Self Diagnosis
for TV
Self Dignosis for
HTV
Softwate
Upgrade
Service Pattern OFF
TV Reset
Description
Set an IP address to establish an Internet connection.
Set the Hotel ID.
Download, update, organize, and delete apps, Use WebBrowser or
Hospitality Browser.
Widget Mode ON / OFF.
Select the solution type, it depending on model - Vendor Server or
SINC Server.
Set the server IP.
Set the server URL.
Use the virtual standby mode.
When Virtual Standby is On, TV power consumption is 9.5W to
17.4W, depending on the dimensions of the screen.
Use the IPTV Mode (it depending model - Only IPTV model support it).
ON : Display the source list browser.
OFF : Do not display the source list browser and move to the next
source.
Enter Self Diagnosis Menu.
Picture Test: Use this to check for picture problems. If problems
appear in the test picture, select Yes and follow the directions on
the screen.
Sound Test: Use the built-in melody sound to check for sound
problems. If problem occur during the test, select Yes and follow
the directions on the screen.
Lets you check the state of communication with the SI STB or SBB.
If you have any problems with the communications with the SI
STB or SBB, use this diagnosis function. If STB SI Vendor Setting
appears to have failed and communication with the SI STB or SBB
has failed, first check your SI STB or SBB. If your SI STB or SBB
does not have a problem, contact to Samsung Service.
Bathroom AMP : use to check for variable audio(bathroom) out
SW USB Update function.
Same function with SVC Service Pattern.
Returns all settings on the TV to their factory defaults.
23
English
2013-03-21 4:36:56