Samsung HG690 Installation Manual page 71

Update SIRCH Version
To update the SIRCH version for Clone and user should follows as below.
1. Go to File Menu
2. A window opens asking for the Software Version (Clone File Up gradation).
3. User should provide a higher version than the TV's current version in version value. E.g.
i) If software version is set as 01a0 in SIRCH PC application, then current TV SIRCH version should be less
than this value for update.
4. Software version value for clone should in hexadecimal format e.g. fa1b but less than ffff.
5. After providing the value, click on Update update version value.
Closing the application
1. To close the application, either click the close button on the top right or go File Menu and Exit.
[HG690_EURO]Install_Guide-00ENG.indd 71
Update Software Version.
71
English
2013-03-21 4:37:04