Samsung HG690 Installation Manual page 61

¦
GENERAL INFORMATION
System Overview
The 'Samsung Interactive Remote Control for Hospitality (SIRCH)' application is a Remote Control Update system
designed to provide better and more cost-effective service for Hospitality industries. This allows user/operators to
configure the guest TV with RF distributing system. Using this helps the user to set and configure the guest room TV
Set parameters. The created setting file will get used by SRCUS for configuration of guest TVs.
The Application is intended to create or modify clone files for user and to update guest TV with these clone files by
transmitting them via RF. Using this provides a user interface similar in appearance to the TV's parameter settings
where user the can update factory menu settings and modify or tune channels to update guest TVs.
To effectively complete and support the requirements of the "Hospitality" Industry, a management system is needed
that will allow the operator to have control of the TV sets in the guest's room without requiring a potentially disruptive
or costly visit to each room
– Channel Configuration Made Easy All from the Head End FMA System.
– Will configure and deliver the channel line-up and SW upgrade to the guest room terminals via the
hotel's coaxial distribution.
This application is an S/W utility to configure user configuration parameter defined below:
– Hotel Factory Menu (Standalone Menu/Interactive Menu)
– Channel map
This also supports generation of a TS stream embedding clone file information and control of the modulator used for
broadcast of the TS stream.
Purpose of the Document
This document is prepared to facilitate and guide the user in creating/modifying clone files, to update interactive/
standalone menu settings, to configure channel map and to create TS stream using SIRCH. Screens-wise
explanations are provided here for the process flow.
[HG690_EURO]Install_Guide-00ENG.indd 61
61
English
2013-03-21 4:37:03