Using The Wink Self-Timer - Canon PowerShot SX210 IS Getting Started

Using the Wink Self-Timer

Point the camera at the subject and press the shutter button fully. The camera
will shoot approximately two seconds after it detects a wink.
What if a wink is not detected?
• Wink a bit slowly.
• A wink may not be detected if eyes are covered by hair or a hat, or when wearing
glasses.
Changing the number of shots
For the screen in Step 1, press the l button, then press the op buttons to
change the number of shots. Press the l button to accept the setting.
Choose .
¨
Follow Steps 1 – 2 on p. 55 to choose
then press the l button.
¨ Press the qr buttons or turn the  dial to
, then press the m button.
choose
Compose the shot and press the
shutter button halfway.
¨
Confirm that a green frame appears around
the face of the person who will wink.
Press the shutter button fully.
¬
The camera will enter shooting stand-by,
and [Wink to take picture] will appear on
the screen.
Face the camera and wink.
¬
The shutter will release approximately 2
seconds after a wink is detected from the
person with a frame around the person's face.
¨ To cancel the countdown, press the p button.
,
61