Canon PowerShot SX210 IS Getting Started page 188

Changing Shooting Function Settings
Changing the IS-Mode Settings
• If camera shake is too strong, attach the camera to a tripod. You should
set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
The Dynamic effect increases when you press the zoom lever toward j
and zoom out.
152
¨ Choose [IS Mode], then press the qr
buttons to choose an option.
Image stabilization is always on.
You can confirm the result directly
Continuous on the display, which makes it
easier to check the composition or
focus.
Reduces strong camera shake, for
*1
Dynamic example when walking, while
shooting movies.
Shoot Image stabilization is only active at
2
Only* the moment of shooting.
Image stabilization only counters
up and down motion. This option is
*2
Panning
recommended for shooting objects
moving horizontally.
*1 Setting changes to [Continuous] when
shooting still images.
*2 Setting changes to [Continuous] when
shooting movies.