Checking Connection Information - Canon PowerShot SX210 IS Getting Started

Using the Eye-Fi Card

Checking Connection Information

You can check the Eye-Fi card's access point SSID, or connection status.
Disabling Eye-Fi Transfer
You can set the card to disable Eye-Fi transfer.
What if [Eye-Fi Settings] does not appear?
[Eye-Fi Settings] will only appear when the Eye-Fi card is inserted in the camera.
If he Eye-Fi card has a write-protect tab, you will not be able to check the
card's connection status, or disable Eye-Fi card transmission when the tab
is in the locked position.
158
Choose [Connection info].
¨ Press the n button, then choose
[Eye-Fi Settings] from the 3 tab, and
press the m button.
¨ Press the op buttons or turn the  dial
to choose [Connection info], then press the
m button.
¬
The Connection info screen will appear.
Choose [Disable] in [Eye-Fi trans.]
¨ Press the n button, then choose
[Eye-Fi Settings] from the 3 tab, and
press the m button.
¨ Press the op buttons or turn the  dial
to choose [Eye-Fi trans.], then press the
qr buttons to choose [Disable].