Canon PowerShot SX210 IS Getting Started page 8

Use the included charger to charge the battery. Be sure to charge the battery
as it is not charged at the time of purchase.
~.c~
. . , . • . . . . • . . • . . • . . • . • • . . . • . . . . . . • . . . . • • . . . . . . . · ••/ ' .
~
tz>r
SJ . . . ,
~ ~1.~
. . • • . • . • • . .
t
i ". . . . . . . . . . . • . .
4 . . • . • • . . • . • • . • . • .
; ~:/
~r®
~T?;./
Remove the cover.
Insert the battery.
,1111 Align the'" marks on the battery and
charger, then insert the battery by sliding it
in
CD
and down
® .
CB-2LXE
Charge the battery.
!lIIl
For CB-2LX: Flip out the plug
CD
and plug
the charger into a power outlet
® .
' 1 111 For CB-2LXE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
l!to The charge lamp lights red and charging
starts.
Ill>
The charge lamp will light green when
charging has finished. Charging takes
approx. 2 hours and 5 minutes.
Remove the battery.
'!IlIUnplug the battery charger from the power
outlet, then remove the battery by sliding it
in
CD
and up
® .
8