Canon PowerShot SX210 IS Getting Started page 13

The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
IIII~
Press the power button.
ill!>
The Date/Time screen will appear.
o ~ . . • •
Set the date and time.
11111
Press the
~ ~
buttons to choose an option.
11111
Press the ........ buttons or turn the dial
to set a value.
Complete the setting.
11111
Press the
@
button.
ill.
Once the date and time have been set, the
Date/Time screen will close.
11111
Pressing the power button will turn off the
camera.
@
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/Time
screen will appear each time you turn on the camera.
~
Daylight saving time settings
If you choose in Step 2 and press the ....... buttons or turn the dial to
choose
;+~
I
you will set the time to daylight saving (1 hour ahead).
13