Editing - Canon PowerShot SX210 IS Getting Started

Editing

You can trim the beginnings and ends of recorded movies in one-second
increments.
Movie Editing Panel
Movie Editing Bar
Choose *.
¨ In Step 3 on p. 33, choose * from the
displayed movie control panel, then press
the m button.
¬
The movie editing panel and the movie
editing bar will appear.
Set the editing range.
¨ Press the op buttons and choose
¨ Press the qr buttons or turn the  dial to
move . will display at each one
second interval. If you choose
trim the beginning of the movie from
you choose
movie from
¬
Even if you move
point, only the portion from the nearest
to the left will be trimmed when
chosen. Only the portion from the nearest
to the right will be trimmed when
chosen.
¬
The section indicated with
section of the movie that remains after
editing.
Check the edited movie.
¨ Press the op buttons to choose
(Play), then press the m button. The
edited movie will play.
¨
To edit the movie again, repeat Step 2.
¨ To cancel editing, press the op buttons,
and choose
button, press the qr buttons or turn the
 dial to choose [OK], and press the m
button again.
, you can trim the end of the
.
to a point other than a
will be the
. After pressing the m
or .
, you can
. If
is
is
107