Auto Shooting After Wink Detection (Wink Self-Timer); Auto Shooting After Detecting New Person (Face Self-Timer) - Canon Power Shot SX710 HS User Manual

●
You can also shoot as usual by pressing the shutter button.
●
The camera can detect smiles more easily when subjects face
the camera and open their mouth wide enough so that teeth are
visible.
●
To change the number of shots, press the [
] in step 1. [Blink Detection] ( = 51) is only
after choosing [
available for the final shot.
●
Automatic shooting is not available while you are holding down
the [ ] button.

Auto Shooting after Wink Detection (Wink Self-Timer)

Aim the camera at a person and press the shutter button all the way
down. The camera will shoot about two seconds after a wink is detected.
1
Choose [ ].
● Follow steps 1 – 2 in "Specific Scenes"
( = 57) and choose [
press the [
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [
[ ] button.
2
Compose the shot and press the
shutter button halfway.
●
Make sure a green frame is displayed
around the face of the person who will wink.
3
Press the shutter button all the way
down.
●
The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
●
The lamp blinks and the self-timer sound
is played.
][ ] buttons
Still Images Movies
], and then
] button.
], and then press the
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
( = 74). This is useful when including yourself in group photos or similar
shots.
4
Face the camera and wink.
●
The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
●
To cancel shooting after you have triggered
the self-timer, press the [
●
If the wink is not detected, wink again slowly and deliberately.
●
Winking may not be detected if eyes are obscured by hair, a hat,
or glasses.
●
Closing and opening both eyes at once will also be detected as a wink.
●
If winking is not detected, the camera will shoot about 15 seconds later.
●
To change the number of shots, press the [
] in step 1. [Blink Detection] ( = 51) is only
after choosing [
available for the final shot.
●
If no one is in the shooting area when the shutter button is
pressed all the way down, the camera will shoot after a person
enters the shooting area and winks.
●
The zoom factor cannot be changed with the [
press the shutter button all the way down.
Auto Shooting after Detecting New Person
(Face Self-Timer)
1
Choose [ ].
● Follow steps 1 – 2 in "Specific Scenes"
( = 57) and choose [
press the [
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [
[ ] button.
Before Use
Basic Guide
Advanced Guide
] button.
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
][ ] buttons
Tv, Av, and M Mode
Playback Mode
] button after you Wi-Fi Functions
Setting Menu
Accessories
Still Images Movies
Appendix
Index
], and then
] button.
], and then press the
63