Installation and Operation, cont'd
5.
If the edges of the image seem to exceed their boundaries
or if thin lines and sharp edges look thick and fuzzy, try
changing the Level DIP switch (switch 1) to On (up). If the
image is too bright, turn the Level switch to Off (down).
6.
If the image still does not display correctly, call the Extron
S
3
Sales & Technical Support Hotline.
If the interface does not respond to controls
If the picture does not move on screen when the horizontal shift
control is rotated, DDSP is in use. Set the DDSP DIP switch
(switch 4) on the front panel to Off (down).
2-18
RGB 190F, RGB 192 • Installation and Operation
RGB 190F, RGB 192
A
Appendix A
Reference Information
Specifications
Included Parts
Optional Accessories
Cables