This manual has been prepared for the owner and operators of a Powermatic Model DS20 Disc Sander. Its purpose, aside from machine operation, is to promote safety through the use of accepted correct operating and maintenance procedures. Completely read the safety and main- tenance instructions before operating or servicing the machine.
12. USE SAFETY GLASSES. Also use face or SAFETY: General Rules dust mask if cutting operation is dusty. As with all machines there is a certain amount of hazard involved with the operation and use of this 13. SECURE WORK. Use clamps or a vise to sander.
how often you do this type of work. To reduce your Remove plug from power source outlet when exposure to these chemicals, work in a well- adjusting table, changing belts, or removing or ad- ventilated area, and work with approved safety justing platen.
DUST COLLECTION The DS20 comes standard with a 4" diameter dust outlet (G), Figure 2. To attach a dust collection system, simply slide the hose over the outlet and secure with a hose clamp.
(K) to the desired angle. The mitre gauge body is set to stop Your DS20 Sander requires minimal maintenance. at 0 degrees and 45 degrees left or right. To move Periodically, make sure table trunnions and rack the gauge beyond these points, the stop link (L) (M &...
PARTS LIST: Model DS20 Disc Sander NO. PART NO. DESCRIPTION NO. PART NO. DESCRIPTION 6295560 Base 6295611 Guard, Disc 6295561 Column 6295612 Segment, Solid 6295562 Rack 6295613 Screw, Hex Hd. 3/8"-16 x 1-3/4" 6295563 Screw, Hex 5/16"-18 x 1/2" 6295614 Pilot, Right 6295564 Support, Column 6295615 Screw, Philip Hd 1/4"-20 x 1/2"...
Page 11
ELECTRICAL SCHEMATIC Model DS20 To order parts or reach our service department, please call our toll free number between 8:00 A.M. and 4:30 P.M. (CST), Monday through Friday. Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately. Locating the stock number of the part(s) required from your parts manual will also expedite your order.
Page 12
01/01 WMH Tool Group P.O. Box 1349 Auburn, WA 98071-1349 Phone: (800) 274-6848 Fax: (800) 274-6840 E-mail: powermatic@wmhtoolgroup.com Website: www.powermatic.com POWERMATIC ALL RIGHTS RESERVED...