Supervisor Password / User Password - Intel PT-6IBD User Manual

440BX
MAINBOARD
4.11

SUPERVISOR PASSWORD / USER PASSWORD

STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
INTEGRATED PERIPHERALS
PNP/PCI CONFIGURATION
LOAD SETUP DEFAULT
ESC : Quit
F10 : Save & Exit Setup
The password entry in this field is different to the "Power On Function" mentioned in
Section 2-2 and Section 4-8. Those password settings are used to power on your PC
system, However, the "SUPERVISOR PASSWORD" will be used to check the
authority when power-on the PC system. The Supervisor Password will have different
function according to the "Security Option" setup in Section 4.5:
When "Setup" is selected in Security Option:
If you want to change the BIOS setting, you will have to key-in the Supervisor
Password so that you can start the BIOS setup program and change the system
setting..
When "System" is selected in Security Option:
When turn on the PC system, it will request you to enter the Password. Without
the correct password, the PC system will stop and the operation system will not be
loaded.
ROM PCI / ISA BIOS (2A69KXXX)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Time, Date, Hard Disk Type ...
4-24
AWARD BIOS SETUP
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
HDD LOW LEVEL FORMAT
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: Select Item
(Shift)F2 : Change Color