Jumpers - Intel PT-6IBD User Manual

440BX
MAINBOARD
(R) PWR-LED & KBLOCK: Front Panel Power LED and Key-Lock Connector
1 Pin # Signal name
1
2
3
4
5
5

3.4 JUMPERS

This section will discuss the jumper setting on the mainboard. In order to let you have
better idea of the jumper setting, please see below for the explanation of jumper
settings before you start this section.
open
1-2
The following jumpers which labeled with "optional" means they are the optional
choice for customers and the related components are normally not populated on the
mainboard. In order to make the mainboard works properly in your PC system,
please make sure all jumper settings are at correct before installing this mainboard.
A jumper is a set of two, three or more jumper pins which allows users to make
different system configuration by putting the plastic connector plug (mini-jumper) on it.
The jumper setting is necessary when installing different components onto the
mainboard.
(A) JP1: K/B & Mouse OnNow Selection
Pullup (+ 5V DC for Power LED)
No Connection
Ground
Keyboard Lock
Ground
1 1
1
HARDWARE SETUP
short
,
2-3
,
3-16
1
1