Table of Contents
Advertisement
Motherboard
Load BIOS Default
When you access "Load BIOS Default", the following message appears:
The BIOS Default values are the "worst case" default, and are the most stable
values for the system. Use them if the system is performing erratically due
to hardware problems. To load the BIOS Default values, press <Y> then
<Enter>.
Load Setup Default
When you access "Load Setup Default", you are shown the following
message:
The Setup Default values represent the "best case" default, and should
provided optimum system performance. To load the Setup Default values,
press <Y> then <Enter>.
Supervisor / User Password Setting
When you select this function, the following message will appear at the
center of the screen to assist you in creating a password.
Type the password, up to eight characters, and press <Enter>.
password typed now will clear any previously entered password from CMOS
memory. You will be asked to confirm the password. Type the password
again and press <Enter>. You may also press <Esc> to abort the selection
and not enter a password.
If you select System at Security Option of BIOS Features Setup Menu, you
will be prompted for the password every time the system is rebooted or
anytime you try to enter Setup. If you select Setup at Security Option of
Load BIOS Default (Y/N) ?N
Load Setup Default (Y/N) ?N
ENTER PASSWORD
43
The
Advertisement
Table of Contents
