Replacing The Headlight Lamp - KTM 950 SUPERMOTO 2007 Owner's Manual

Hide thumbs Also See for 950 SUPERMOTO 2007:
Table of Contents

Advertisement

»
MAINTENANCE WORK ON CHASSIS AND ENGINE
55

Replacing the headlight lamp

Remove the screws [1], tilt the headlight mask up towards the front and detach at the
bottom.
1
1
Never touch the glass of the bulb with your fingers. The glass of the bulb must remain absolutely
free from grease. Heat will otherwise cause the grease to evaporate and settle down on the
reflector.
PARKING LIGHT BULB:
Pull the bulb socket [2] out of the reflector and pull the bulb out of the bulb socket.
3
4
2
HEADLIGHT BULB:
Unplug the connector [3] and remove the rubber cap [4]. Turn the bulb socket [5] approx.
30° in a counterclockwise direction and remove.
5
Insert a new bulb, making sure the tabs [A] on the lamp engage in the recess [B] in the
headlight. Mount the bulb socket, rubber cap and connector.
A
Attach the headlight mask at the bottom, mount the screw and tighten to 10 Nm.
B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

950 supermoto r 20072007 950 supermoto r

Table of Contents