Replacing Headlight Lamp/Parking Light Lamp; Exchanging The Brake Light And Tail Light Bulb - KTM 2006 660 SMC Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE
1
4
34
8
7

Replacing headlight lamp/parking light lamp

Loosen both rubber bands [1] and tilt headlight mask to the front.
Pull the parking light lamp with holder [2] carefully out of the reflector. Pull
3
connector [3] off the headlamp and remove rubber cap [4]. Disengage retain-
ing clip and take bulb out of reflector. When changing the parking-light lamp,
simply pull it out of the holder.
2
Insert the new lamp such that the noses [5] engage in the recesses [6] .When
doing so, do not touch the glass body of the lamp so that it remains free from
fat. Engage retaining clip, mount rubber cap and connector. If the parking-
light lamp is to be replaced, simply insert it in the holder. Reinsert the park-
ing-light lamp together with the holder.
Engage the bottom end of the headlamp mask at the retaining pins and fix
5
the mask by means of the rubber bands.
6

Exchanging the brake light and tail light bulb

Remove seat.
Disengage retaining clip [7] and take bulb out of reflector. When changing
the brake-light lamp, simply pull it out of the holder.
Slightly depress the bulb, turn it approx. 30° counterclockwise and pull it out
of the socket.
To mount the lamp reverse the worksteps indicated above.
8
When changing the tail-light lamp [8], simply pull it out of the holder.
»