Technical Specifications – Chassis - KTM 950 SUPERMOTO 2007 Owner's Manual

TECHNICAL SPECIFICATIONS – CHASSIS
CHASSIS
Frame
Fork
Wheel travel front
Rear suspension
Wheel travel rear
Front brake
Rear brake
Authorized front tires *
Air pressure front
Authorized rear tires *
Air pressure rear
Fuel tank capacity
Gear ratio – rear wheel
Chain
Lighting
* further tire releases are available on the Internet at www.ktm.com
950 SUPERMOTO / R 2007
tubular chrome-molybdenum-steel space frame
WP Suspension – Up Side Down fork 4860 ROMA
200 mm (7.9 in)
WP Suspension - Progressive Damping System shock absorber 4618 BAVP
210 mm (8.3 in)
disk brake, 2 floating perforated brake disks Ø 305 mm (12 in), brake calipers radially bolted
disk brake, perforated brake disk Ø 240 mm (9.4 in), floating brake caliper
PIRELLI Scorpion Sync 120/70 ZR17 M/C 58W
road, driver only................................................2.4 bar (34 psi)
road, with passenger / maximum payload ............2.4 bar (34 psi)
PIRELLI Scorpion Sync 180/55 ZR17 M/C 73W
road, driver only................................................2.4 bar (34 psi)
road, with passenger / maximum payload ............2.6 bar (37 psi)
17 liters / 4.5 USgal (950 Supermoto), 14 liters / 3.7 USgal (950 Supermoto R), 4 liters /1 USgal reserve
17:41
5/8 x 5/16" X-ring
headlight .........................................................H4 12V 60/55W (socket P43t)
position light front ............................................12V 5W (socket W2.1x9.5d)
indicator lamps.................................................LED
position light rear..............................................12V 5W (socket W2.1x9.5d)
stoplight ..........................................................12V 21W (socket BA15s)
licens plate illumination ....................................12V 5W (socket W2.1x9.5d)
flasher .............................................................12V 10W (socket BA15s)
»
79