Panel Description; Front, Top And Side Panels; Antenna; Hand Strap - Icom IC-R6 Instruction Manual

1

PANEL DESCRIPTION

Front, top and side panels

q
w
e
r
t
q ANTENNA CONNECTOR (p. I)
Connect the supplied antenna.
• An optional AD-92SMA is available for connecting an antenna
with a BNC connector.
w FUNCTION KEY [FUNC]
While holding down this switch, access a key's secondary
or third function.
1
e SQUELCH
!2
!1
Function display
(pp 3, 4)
r UP/DOWN KEYS [ ]/[ ]*
!0
Adjusts the audio volume level. (p. 11)
o
t BAND • LOCK • MEMORY NAME KEY
i
[BAND] • [
u
y
Speaker
*The functions of [DIAL] and [ ]/[ ] can be exchanged. See page
49 for details.
• ATTENUATOR KEY [SQL] • [ATT](SQL)
Hold down to temporarily open the squelch and moni-
tor the operating frequency. (p. 13)
While holding down this switch, rotate [DIAL]* to adjust
the squelch level. (p. 12)
While holding down [FUNC], push to toggle the attenu-
ator function ON or OFF. (p. 10)
](BAND) • [ ](BAND)
Push to select the operating frequency band. (p. 7)
While holding down [FUNC], push and hold for
1 second to toggle the lock function ON or OFF. (p. 10)
During memory mode operation, hold down [FUNC],
then push this key to select the display type.
• The display shows the memory bank name
and channel number in sequence, and then returns to the
frequency display.
† The memory bank name or memory name must have pre-
programmed.
, memory name
† †