Transmitting A Dtmf Code; Dtmf Memory; Dtmf Transmission Speed - Icom IC-V8 Instruction Manual

7

DTMF MEMORY

Transmitting a DTMF code

D Using a DTMF memory channel
q
Push [0•
ory.
w
Rotate [VOL] to select the desired channel.
e
Push [SQL] or [PTT] to exit the DTMF memory mode.
r
While pushing [PTT], push [SQL] to transmit the selected DTMF
memory.
• After the DTMF code is transmitted, the transceiver returns to re-
ceive automatically.
D Manual DTMF code transmission
While pushing [PTT], push digit keys, A–F to transmit a DTMF
code manually.
DTMF
transmission speed
When slow DTMF transmission speeds are required with DTMF
memory transmission (as for some repeaters), the transceiver's rate
of DTMF transmission can be adjusted.
q
While pushing [Y] and [Z], turn the power on to enter
.
MODE
w
Push [Y]/[Z] several times until "dtd"
appears.
e
Rotate [VOL] to select the desired

DTMF transmission speed.

• Four speeds are available: "1" (100
msec. intervals) is the fastest; "5" (500
msec. intervals) is the slowest.
r
Push [#•
.
MODE
29
- ] after pushing [A•
DTMF M
] to exit
ENT
] to enter the DTMF mem-
FUNC
USING
INITIAL SET
INITIAL SET MODE
INITIAL SET
MR
MR