Other Functions; Set Mode - Icom IC-V8 Instruction Manual

' ' Set mode

D D Entering set mode
q Push [8•
] after [A•
SET
w Push [∫] or [√] to select the desired item.
e Rotate [VOL] to select the condition/value.
• To exit set mode, push [#•
D D Repeater tone frequency
Selects tone encoder frequency for accessing
a repeater, etc. from one of 50 available fre-
quencies.
• 67.0–254.1 Hz (50 tones): 88.5 Hz (default)
D D Tone squelch frequency
Selects frequency for tone squelch or pocket
beep operation from one of 50 available fre-
quencies.
• 67.0–254.1 Hz (50 tones): 88.5 Hz (default)
D D DTCS code
Selects DTCS encoder/decoder code with po-
larity (N: normal/I: inverse) from one of 208
available codes.
• 023N/I–754N/I: 023N (default)
D D Offset frequency
Sets the offset frequency for duplex (repeater)
operation within 0–20.00 MHz range.
D D Reverse function
Turns the reverse function ON and OFF.
• Default: OFF

OTHER FUNCTIONS

] is pushed.
FUNC
ENT
].
F
MR
F
MR
F
MR
F
MR
F
MR
11
TX
TX
D TX
TX
TX
46