Battery Charging - Icom IC-V8 Instruction Manual

' ' Battery charging

D Regular charging
with the BC-146
The optional BC-146 provides
regular charging of an optional
battery pack
transceiver. The following is
additionally required:
• An optional AC adaptor.
(An AD-99 is supplied with
BC-146.)
D About AD-99
Attach the spacer (Spacer B/C)
to the adaptor (Spacer A) with
orientation as illustrated in the di-
agram below.
• Attach the spacer (Spacer B/C) to
the adaptor with the orientation of
the stamp "
When removing the spacer
(Spacer B/C), Push the notch
carefully with your finger to re-
move the spacer (Spacer B/C)
from the adapter (Spacer A).
R CAUTION!
DO NOT push or force the notch with a screw driver, etc., to remove it.
DO NOT bend the notch when the adapter and spacer are not joined
together. This will cause weakening of the notch plastic.
Both cases may break the notch and it may not be able to be reattached.
with/without
" pointing up.
BATTERY PACKS
Turn power OFF.
Spacer A
Remove the spacer
from the adapter.
Push the notch
carefully.
Check orienta-
tion for correct
charging. (In-
sert together
with AD-99.)
BC-146 + AD-99
Check orientation
and
Spacer B/C
3
12