Dtmf Memory; Programming A Dtmf Code - Icom IC-V8 Instruction Manual

Programming a DTMF code

The transceiver has 5 DTMF memory channels (d0 to d4) for
storage of often-used DTMF codes of up to 24 digits.
q
Push [0•
DTMF
memory.
• One of "d0" to "d4" appears.
w
Rotate [VOL] to select the desired
channel.
e
Push [0•
DTMF
pushing [A•
DTMF programming mode.
• "_ _ _ _ _" appears.
• Programmed memories can be
cleared in this way.
r
Push the digit keys, [A•
] and [#•
TION
• A maximum of 24 digits can be input.
• [ • ] enters as "E", [#•
OPTION
• If a digit is mistakenly input, push [SQL] or [PTT] momentarily
then repeat from step
t
Push [SQL] or [PTT] to input the digits and exit the DTMF pro-
gramming mode.
• Programmed DTMF codes sound when [SQL] is pushed to exit.

DTMF MEMORY

- ] after pushing [A•
M
- ] for 1 sec. after
M
] to enter the
FUNC
FUNC
] to enter the desired DTMF code.
ENT
q
.
] to enter the DTMF
FUNC
MR
MR
], [B• ], [C•
CALL MR
] enters as "F."
ENT
7
], [D• ], [ •
CLR OP
-
28