Scan Operation; Scan Types; Programmed Scan - Icom IC-V85 Instruction Manual

8

SCAN OPERATION

■ Scan types

PROGRAMMED SCAN

Start
1A
Band
2A
edge 3A
Programmed scan P1 scans between 1A and 1b, P2 scans be-
tween 2A and 2b, and P3 scans between 3A and 3b frequencies.
MEMORY (SKIP) SCAN
Mch 1 Mch 2
Mch 0
Mch 99 Mch 10
PRIORITY WATCH
Priority memory channel watch
VFO frequency
145.20 MHz
5 sec.
Priority memory channel scan
VFO frequency
145.20 MHz
5 sec. 50 msec.
35
End
1b
Band
2b
Scan edges
3b edge
Scan
Jump
Mch 3 Mch 4 Mch 5
SKIP
Mch 6
SKIP
Mch 9 Mch 8 Mch 7
Priority channel
Mch 3
50 msec.
Mch 3
Mch 2 Mch 4
Memory
scan
Mch 1 Mch 5
Priority channels
Mch 99 Mch 6
■ Programmed scan
Programmed scan repeatedly scans between two user pro-
grammed frequencies (memory channels "1A–3A" and
"1b–3b") or scans between upper and lower band edges. This
scan is useful for checking for signals within a specific fre-
quency range such as repeater output frequencies, etc.
Scans between lower (start) and high (stop) frequency.
q Push [CLR] to select VFO mode, if necessary.
wPush [FUNC] and [
A
Push
FUNC
ePush [FUNC] and [
sired scan edge, "P1," "P2," "P3" or "AL."
• "AL" for full scan, "P1", "P2" and "P3" for programmed scan be-
tween the programmed scan edge channels as "1A"–"1b,"
"2A"–"2b" and "3A"–"3b."
• To change the scan direction, push [Y Y ] or [Z Z ].
• When [VOL] is assigned as tuning dial, rotate [VOL] to change
the scan direction. (pgs. 18, 53)
A
Push
FUNC
r Push [CLR] to stop the scan.
SKIP
](5) to start a scan.
SCAN
SCAN
5
](8) several times to select the de-
SET
SET
8