Icom IC-V85 Instruction Manual page 18

2
PANEL DESCRIPTION
D Keypad
[FUNC]
Access to secondary function.
[CALL]
Selects the call channel. (p. 26)
[MR]
➥ Selects a memory mode. (p. 26)
➥ After pushing [FUNC], enter into memory pro-
gramming/editing mode. (pgs. 27–29)
➥ After pushing [FUNC], programs/transfers
VFO/memory or call channel contents into
memory channel/VFO when pushed and held
for 1 sec. (pgs. 27–29)
[CLR]
Selects VFO mode, aborts direct frequency input,
or cancels scanning, etc. (pgs. 17, 35)
5
[1• ]
TONE
➥ Input digit "1" during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], selects the subaudible
tone function. (pgs. 22, 39)
[2• . ]
P BEEP
➥ Input digit "2" during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], turns the pocket beep
function ON and OFF. (p. 41)
[3• . ]
T SCAN
➥ Input digit "3" during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], starts tone scanning.
(pgs. 24, 42)
[4• ]
DUP
➥ Input digit "4" during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], selects duplex function
(–duplex, +duplex, simplex). (p. 22)
[5• ]
SCAN
➥ Input digit "5" during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], starts scanning. (p. 35)