Installing Expansion Boards - HP ProLiant ML310 Generation 5p User Manual

Remove the expansion slot cover.
4.
CAUTION:
all expansion slots have either an expansion slot cover or an expansion board installed.

Installing expansion boards

CAUTION:
remove all AC power cords before removing or installing the expansion boards.
Power down the server (on page 16).
1.
Unlock the bezel (on page 17).
2.
Remove the access panel (on page 18).
3.
Remove the expansion slot cover
4.
Install the expansion board, and press firmly to seat the board in the connector.
5.
To prevent improper cooling and thermal damage, do not operate the server unless
To prevent damage to the server or expansion boards, power down the server and
("Removing the expansion slot cover" on page 38).
Hardware options installation 39