Connect the cable to the cache module.
7.
Install the battery pack.
8.
Route the cable.
9.
Install the access panel (on page 18).
10.
IMPORTANT:
Close the tower bezel.
11.
Power up the server (on page 16).
12.
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
Installing the Trusted Platform Module board (on page 45).
1.
Retaining the recovery key/password (on page 46).
2.
Be sure that the panel is locked into place securely before powering up the server.
Hardware options installation 44