Close the PCI retainer.
6.
Connect any required internal or external cables to the expansion board. See the documentation that
7.
ships with the expansion board.
Install the access panel (on page 18).
8.
Install the bezel
9.
Power up the server (on page 16).
10.
PCI-X extender board
To install the component:
Power down the server (on page 16).
1.
Unlock the bezel (on page 17).
2.
Remove the access panel (on page 18).
3.
Remove the system air baffle and PCI card guide (on page 20).
4.
Install the PCI-X extender board and secure the four T-15 screws.
5.
("Remove the
bezel" on page 17).
Hardware options installation 40