Installing Expansion Boards - HP ProLiant ML370 Generation 4 Reference And Troubleshooting Manual

84 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
2. Extend or remove the server from the rack ("Extending the server from the
rack" on page 28).
3. Remove the front bezel door, if necessary.
4. Remove the access panel ("Removing the access panel" on page 30).
5. Remove the expansion slot cover.
To replace the component, reverse the removal procedure.

Installing expansion boards

To install an expansion board:
1. Remove the expansion slot cover ("Removing the expansion slot cover" on
page 83).
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all PCI slots have either an expansion
slot cover or an expansion board installed.
CAUTION: To prevent damage to the server or expansion
boards, power down the server and remove all AC power cords before
removing or installing the expansion boards.