Table of Contents
Advertisement
Shutdown diagnostics
To perform shutdown diagnostics:
1.
With the ignition OFF, press and hold the Valet/Program switch.
2.
Turn the ignition ON and then back OFF while holding the Valet/Pro-
gram switch.
3.
Release the Valet/Program switch.
4.
Press and release the Valet/Program switch. The LED flashes a number of
times on the control center to report the last shutdown for one minute or
until the ignition is turned on, as shown in the following table:
LED Flashes
1
2
3
4
5
6
7
8
9
10
11
*
Timer mode error: Ignition is on or shutdown input is active when activating
timer mode.
Turbo mode error: Turbo mode is programmed off, engine is not on or
shutdown input is active.
Manual mode error: MTS not enabled.
56
Shutdown Mode
Runtime expired
Over-rev shutdown
Low or no RPM
Transmitter shutdown (or optional push button)
(+) Brake shutdown
(-) Hood shutdown
Timer mode/Turbo mode/Manual mode error *
Neutral safety shutdown
Low battery (voltage mode)
-------------------------------------------------------
Wait-to-start input timed out
© 2008 Directed Electronics. All rights reserved.
Hide quick links:
Advertisement
Table of Contents
