Shutdown Diagnostics - Viper Responder One Installation Manual
Hide thumbs
Also See for Responder One:
- Owner's manual (20 pages) ,
- Owner's manual (14 pages) ,
- Owner's manual (25 pages)
Table of Contents
Advertisement
Shutdown diagnostics
The unit has the ability to report the cause of the last shutdown of the
remote start system. To enter diagnostic mode:
1. Turn the ignition off.
2. Press and
3. Turn the ignition on and then off.
4. Release the Program switch.
5. Press and release the Program switch.
The LED will now report the last system shutdown by flashing for one
minute in the following grouped patterns and will stop flashing when
the ignition is turned on:
42
HOLD
the Program switch.
© 2008 Directed Electronics. All rights reserved.
Hide quick links:
Advertisement
Table of Contents
