How To Assemble - Dirt Devil vacuum cleaner Owner's Manual

HOW TO ASSEMBLE

TOOL REQUIRED: PHILLIPS OR FLAT HEAD SCREWDRIVER
1. 2.
Remove dirt container Attach back panel of cleaner by pushing
from back panel. down into place (Diagram 2). Insert the two
(2) screws into the front of the back panel
and tighten until secure (Diagram 2a).
4. 5.
Replace dirt container by tilting Slide upper handle into Power
back until it snaps into place. Brush Tool caddy.
SECURE BACK HOSE
7. 1.
Insert the one (1) screw into
Wrap hose around back of
the front and tighten until
hose caddy. Push hose wand
secure.
down into the right side of
cleaner.
2a. 3. 3a.
Attach lower hose to right side of
back panel (Diagram 3). Insert one
(1) screw through the back of the
hose to secure (Diagram 3a).
6.
Insert handle fastener into the
back of the Power Brush Tool
caddy.
TOOL STORAGE
1.
b
a
BACK
FRONT
Attach tools: (a) Slide the dust
brush onto post on the upper tool
caddy with bristles facing out. (b)
Clip Power Brush Tool onto the front
of the Power Brush Tool caddy. (c)
Slide the extension wand/crevice
tool into round slot on the front
right side of tool caddy.
6
c