Dirt Container & Filter: Removal & Replacement - Dirt Devil vacuum cleaner Owner's Manual

HOW TO OPERATE: CONTINUED
EXTENSION WAND
4.
If additional length is
needed, use the extension
wand and crevice tool.
NOTE: The crevice tool is
stored inside the extension
wand.
DIRT CONTAINER & FILTER: REMOVAL & REPLACEMENT
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
NOTE: Unplug cleaner before changing filter.
NOTE: Rinse foam filter once every month. If vacuum is used frequently, the filter may require more frequent cleaning.
NOTE: For best performance, replace pleated filter yearly.
FILTER TYPE
For F8 filter replacement (Part # 3-UDO280-001), please call 1-800-321-1134 or visit
F8
our website at www.dirtdevil.com to locate a dealer nearest you.
EMPTY DIRT CONTAINER
1. 2.
Press dirt container Hold dirt container over garbage can and
release button on back press clean release dirt container button
of cleaner to remove to empty. Make sure container bottom
the dirt container. center opening is clear of debris. Snap
dirt container bottom back into place
after emptying.
CLEAN FOAM FILTER
2. 1.
Tap the lid on the inside of a Remove foam filter from
garbage can to remove dirt container.
excess dust and dirt from
filter. DO NOT APPLY WATER
TO PLEATED FILTER!
CARRY HANDLE
5.
Use the carry handle on
the back of the cleaner
to move the cleaner from
room to room.
CLEAN PLEATED FILTER
1.
2a.
Twist and lift to remove dirt
container lid.
2.
Hold filter under running
water to wash. Ring excess
water out of filter. Allow filter
to dry for at least 24 hours.
8