Primary Harness (H1) Wire Connection Guide - Avital 2200 Installation Manual

primary harness (H1) wire connection guide

______
H1/1
______
H1/2
______
H1/3
______
H1/4
______
H1/5
______
H1/6
______
H1/7
______
H1/8
______
H1/9
______
H1/10
______
H1/11
______
H1/12
H1/1 ORANGE (-) ground-when-armed 500 mA output
This wire supplies (-) ground as long as the system is armed. This output ceases as soon as the system is disarmed.
This wire can be used to turn on an optional sensor or control an optional accessory, such as a window module or pager.
H1/2 WHITE (+/-) selectable light flash output
As shipped, this wire should be connected to the (+) parking light wire. If the light flash polarity jumper inside
the control module is moved to the opposite position (see Internal Programming Jumper section of this guide),
this wire supplies a (-) 200 mA output. This is suitable for driving (-) light control wires in Toyota, Lexus, BMW,
some Mitsubishi, some Mazda, and other model cars.
4
ORANGE
WHITE
WHITE/BLUE
BLACK/WHITE OUTPUT OF INTERIOR LIGHT ILLUMINATION RELAY #30
GREEN
BLUE
VIOLET
BLACK
YELLOW
BROWN
RED
RED/WHITE
(+) Positive Light Flash Output
(-) 500 mA GROUND-WHEN-ARMED OUTPUT
(+/-) SELECTABLE LIGHT FLASH OUTPUT
(-) 200 mA CHANNEL 3 VALIDITY OUTPUT
(-) DOOR TRIGGER INPUT, ZONE 3
(-) MULTIPLEX TRIGGER INPUT, ZONE 1
(+) DOOR TRIGGER INPUT, ZONE 3
(-) CHASSIS GROUND INPUT
(+) IGNITION INPUT, ZONE 5
(+)12V CONSTANT POWER INPUT
(-) 200 mA CHANNEL 2 VALIDITY OUTPUT
(+) SIREN OUTPUT
© 2001 Directed Electronics, Inc. Vista, CA