Konica Minolta bizhub 750 Security Manual page 94

Administrator Operations
6
To prevent entry of a wrong Management Data Encryption Key, enter
the 20-digit Management Data Encryption Key once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Setting screen.
7
Touch [OK].
? What if there is a mismatch in the Management Data Encryption
Keys?
% If there is a mismatch in the Management Data Encryption Keys, a
message appears that tells that there is a mismatch in the Manage-
ment Data Encryption Keys. Perform steps 4 through 7 once again.
8
Make sure that a message appears prompting you to turn OFF and
then ON the main power switch. Now, turn OFF and then turn ON the
main power switch.
750/600
2
2-75